86Ink’s Ink using instruction
Source:    Publish Time: 2009-05-15 02:42   3379 Views   Size:  16px  14px  12px
86Ink’s Ink using instruction

 Ink Handling:

All personnel mixing and handling these products must wear gloves and eye protection. Clean up spills immediately. If ink does come in contact with skin, wipe ink off with a clean, dry, absorbent cloth (do not use solvent or thinner). Wash the affected area with soap and water.

 

Ink Change Over:

Thoroughly clean your current ink and jet assemblies with cleaning solutions. Check, clean and replace, where necessary, mesh filters at the base of primary ink tanks. Shake ink thoroughly in the bottle before adding to the ink reservoir. (Do not aggressively shake, as this may cause air entrapment). A fully illustrated change over procedure is available on request and must be used for all conversions. Press out the mixed ink( ink and cleaning solutions) before test printing, and the picture color will turn better and better as the mixed ink disappear.